OCP for Working at Height

EHS documentation 2 Minutes

Purpose: This procedure is to be used as guidelines for working at heights.

Responsibilities:       Operational: Person working at height

                                    Supervisory: Shift supervisor

                                    Overall:  Production Superintendent

Scope:  Working at heights (above 2 meters from solid ground) like Repair / Maintenance of Electrical fittings, overhead crane and storage / Retrieving of items from racks and store.

Description:

Points of Operation:

  1. Only trained persons to carry out the work at heights.
  2. Wear Safety Shoes, Hand Gloves & safety belt.
  3. Barricade the area below.
  4. Always hook lanyard above the shoulder level.
  5. Do not work at heights alone. Always have personnel at the bottom to communicate and supervise the activity.
  6. Take work permit before working at height from authorized person
  7. The authorized person
    • Conduct a survey of their workplace to determine to determine the presence of various hazards and risks.
    • Communicate to the personnel regarding all the hazards and risks involved and required precautions to be taken while carrying out the assigned job in the job that he would be taking up prior to assigning him the job.
    • Conduct Inspection of the worksite as per the check points to confirm its safe condition.
    • Fix up the anticipated time or Validity of the Permit, Entry personnel and Attendants list.
  8. After the completion of the task the person working ensures that Plant / Equipment are left in safe condition.
  9. Any isolation pertaining to the work / Equipment has to be removed / cancelled.
  10. Obtain the formal acknowledgement from the operator incharge or Issuer  for acceptance.
  11. Always store the ladders and scaffolds in designated place.
  12. Identify all the ladders and scaffolds with unique identification number.
  13. Do not carry tools while climbing.

Points of Checking

  1. Check as per points mentioned in Work Permit

   Actions in case of deviations:

  1. If ladder condition is not satisfactory do not use the ladder.
  2. If any problems observed inform shift supervisor immediately.
  3. Record any incidents in incident / Unsafe condition board

Records:

  1. List of authorized persons.
  2. Work permit for Working at Heights
  3. List of Ladders and scaffold
  4. Incident reports

Published by Pretesh Biswas

Pretesh Biswas has wealth of qualifications and experience in providing results-oriented solutions for your system development, training or auditing needs. He has helped dozens of organizations in implementing effective management systems to a number of standards. He provide a unique blend of specialized knowledge, experience, tools and interactive skills to help you develop systems that not only get certified, but also contribute to the bottom line. He has taught literally hundreds of students over the past 5 years. He has experience in training at hundreds of organizations in several industry sectors. His training is unique in that which can be customized as to your management system and activities and deliver them at your facility. This greatly accelerates the learning curve and application of the knowledge acquired. He is now ex-Certification body lead auditor now working as consultancy auditor. He has performed hundreds of audits in several industry sectors. As consultancy auditor, he not just report findings, but provide value-added service in recommending appropriate solutions. Experience Consultancy: He has helped over 100 clients in a wide variety of industries achieve ISO 9001,14001,27001,20000, OHSAS 18001 and TS 16949 certification. Industries include automotive, metal stamping and screw machine, fabrication, machining, assembly, Forging electrostatic and chrome plating, heat-treating, coatings, glass, plastic and rubber products, electrical and electronic equipment, assemblies & components, batteries, computer hardware and software, printing, placement and Security help, warehousing and distribution, repair facilities, consumer credit counseling agencies, banks, call centers, etc. Training: He has delivered public and on-site quality management training to over 1000 students. Courses include ISO/TS -RAB approved Lead Auditor, Internal Auditing, Implementation, Documentation, as well as customized ISO/TS courses, PPAP, FMEA, APQP and Control Plans. Auditing: He has conducted over 100 third party registration and surveillance audits and dozens of gap, internal and pre-assessment audits to ISO/QS/TS Standards, in the manufacturing and service sectors. Other services: He has provided business planning, restructuring, asset management, systems and process streamlining services to a variety of manufacturing and service clients such as printing, plastics, automotive, transportation and custom brokerage, warehousing and distribution, electrical and electronics, trading, equipment leasing, etc. Education & professional certification: Pretesh Biswas has held IRCA certified Lead Auditor for ISO 9001,14001 and 27001. He holds a Bachelor of Engineering degree in Mechanical Engineering and is a MBA in Systems and Marketing. Prior to becoming a business consultant 6 years ago, he has worked in several portfolios such as Marketing, operations, production, Quality and customer care. He is also certified in Six Sigma Black belt .

Published

2 thoughts on “OCP for Working at Height”

    1. Pretesh Biswas – Pune – Pretesh Biswas has wealth of qualifications and experience in providing results-oriented solutions for your system development, training or auditing needs. He has helped dozens of organizations in implementing effective management systems to a number of standards. He provide a unique blend of specialized knowledge, experience, tools and interactive skills to help you develop systems that not only get certified, but also contribute to the bottom line. He has taught literally hundreds of students over the past 5 years. He has experience in training at hundreds of organizations in several industry sectors. His training is unique in that which can be customized as to your management system and activities and deliver them at your facility. This greatly accelerates the learning curve and application of the knowledge acquired. He is now ex-Certification body lead auditor now working as consultancy auditor. He has performed hundreds of audits in several industry sectors. As consultancy auditor, he not just report findings, but provide value-added service in recommending appropriate solutions. Experience Consultancy: He has helped over 100 clients in a wide variety of industries achieve ISO 9001,14001,27001,20000, OHSAS 18001 and TS 16949 certification. Industries include automotive, metal stamping and screw machine, fabrication, machining, assembly, Forging electrostatic and chrome plating, heat-treating, coatings, glass, plastic and rubber products, electrical and electronic equipment, assemblies & components, batteries, computer hardware and software, printing, placement and Security help, warehousing and distribution, repair facilities, consumer credit counseling agencies, banks, call centers, etc. Training: He has delivered public and on-site quality management training to over 1000 students. Courses include ISO/TS -RAB approved Lead Auditor, Internal Auditing, Implementation, Documentation, as well as customized ISO/TS courses, PPAP, FMEA, APQP and Control Plans. Auditing: He has conducted over 100 third party registration and surveillance audits and dozens of gap, internal and pre-assessment audits to ISO/QS/TS Standards, in the manufacturing and service sectors. Other services: He has provided business planning, restructuring, asset management, systems and process streamlining services to a variety of manufacturing and service clients such as printing, plastics, automotive, transportation and custom brokerage, warehousing and distribution, electrical and electronics, trading, equipment leasing, etc. Education & professional certification: Pretesh Biswas has held IRCA certified Lead Auditor for ISO 9001,14001 and 27001. He holds a Bachelor of Engineering degree in Mechanical Engineering and is a MBA in Systems and Marketing. Prior to becoming a business consultant 6 years ago, he has worked in several portfolios such as Marketing, operations, production, Quality and customer care. He is also certified in Six Sigma Black belt .
      Pretesh Biswas says:

      Please view my blog procedure for evaluation of compliance. https://preteshbiswas.com/2019/06/29/procedure-for-evaluation-of-compliance/

      Reply

Leave a ReplyCancel reply